Sherwin-Williams Cote D’Azur: SW 6951 Paint Color Guide

Sherwin-Williams Cote D’Azur is a deep blue-green that adds color without feeling harsh. You can use this low-light color best as a focused accent, balancing it with warm whites, natural wood, brass, or soft neutral fabrics. Review the Cote D’Azur color page for its specifications, LRV, undertone, and coordinating colors before you choose a finish.

You can bring this shade into a bathroom, bedroom, office, dining room, living room, kitchen, mudroom, patio, front door, or exterior. The right placement and lighting will shape its effect, so sample it on several walls and check it throughout the day. The ideas ahead show how to make the color feel intentional in each space.

Bathroom

Use Sherwin-Williams Cote D’Azur on the vanity wall or as an accent behind a freestanding tub. Its deep blue-green tone has a low light reflectance value, so it can make a small bathroom feel darker when used on every wall.

Pair it with warm white tile, light oak, or pale stone to create contrast. Brushed brass fixtures add warmth, while chrome and polished nickel keep the room cooler and more streamlined.

Element	Recommended choice
Walls	Cote D’Azur on one feature wall
Tile	Warm white or soft gray
Vanity	Natural wood or matte white
Fixtures	Brass, chrome, or nickel

Test a sample beside your tile, countertop, and lighting before painting. North-facing rooms may make the color appear cooler, while warm bulbs can bring out its green undertones.

Front Door

Use Sherwin-Williams Cote D’Azur on your front door when you want a deep teal-blue accent with strong contrast. Its low light reflectance value of 14.9 makes it appear rich and dark, so test a sample outdoors before painting the entire door.

Pair the door with warm white or soft gray trim to keep the entry balanced. Black hardware creates a sharp, modern look, while aged brass adds warmth and suits traditional or cottage-style homes.

For the best result, clean and lightly sand the door before priming. Apply two thin coats of exterior paint, letting each coat dry fully. On a shaded entry, the color may look more blue; in bright daylight, its green undertone can appear clearer.

Bedroom

Use Sherwin-Williams Cote D’Azur on one wall behind your bed to create a strong focal point without making the room feel fully enclosed. This deep blue-teal shade has a low light reflectance value, so it can appear darker in rooms with limited daylight.

Balance the color with warm white bedding, light oak furniture, and woven textures. Choose soft cream rather than bright white if you want a gentler contrast.

Element	Recommended choice
Bedding	Cream, ivory, or soft white
Furniture	Light oak or natural wood
Metals	Aged brass or matte black
Textiles	Linen, wool, or woven cotton

Test a sample beside your bed before painting, since artificial light can shift the color’s blue and green balance. Use a satin or eggshell finish on the wall for easier cleaning and a subtle amount of sheen.

Home Office

Use Cote D’Azur on one accent wall behind your desk to add a deep blue-green backdrop without covering the entire room. Its low light reflectance value means it can appear darker in rooms with small windows, so pair it with strong task lighting and light-colored furniture.

Choose a white, pale wood, or warm gray desk to create clear contrast. Keep window treatments simple and use brass, black, or natural wood details to support the room’s style without competing with the wall color.

Element	Practical choice
Desk	Light wood, white, or warm gray
Lighting	Adjustable task lamp with warm-white bulbs
Storage	White, oak, or matte black
Accents	Brass, leather, or muted blue-green

Test a sample near your desk before painting, since daylight and artificial light can change how the color looks throughout the day.

Dining Room

Use Sherwin-Williams Cote D’Azur on the walls when you want your dining room to feel intimate and polished. This deep blue-teal shade has an LRV near 15, so it absorbs much of the available light and works best in rooms with strong natural or layered lighting.

Pair the walls with warm white trim, such as creamy white rather than a sharp blue-white. Add a wood dining table, brass or antique-gold lighting, and woven accents to balance the color’s cool depth without making the room feel too dark.

Element	Recommended pairing
Trim	Warm white
Furniture	Medium or light wood
Metal finishes	Brass or aged gold
Lighting	Chandelier, sconces, or lamps

Test a sample beside your windows and lighting fixtures before painting. The shade may look more blue in bright daylight and more teal under warm evening bulbs.

Living Room

Use Sherwin-Williams Cote D’Azur on one accent wall to add a deep blue-green tone without making the entire room feel dark. Its low light reflectance value means it absorbs more light, so place it near a window or pair it with warm, layered lighting.

Balance the wall with a light neutral sofa, natural wood, and fabrics in cream, beige, or soft gray. Brass or matte black accents can add contrast, while rust, terracotta, and muted gold work well as small touches.

Element	Practical choice
Walls	One accent wall or lower wall paneling
Furniture	Light upholstery and medium-tone wood
Lighting	Warm bulbs with table and floor lamps
Accessories	Cream, brass, terracotta, or muted gold

Test a sample in both daylight and evening light before painting, because the color can appear more blue or more green as lighting changes.

House Exterior

Use Sherwin-Williams Cote D’Azur on a sheltered front door, porch ceiling, or small accent area rather than across the entire exterior. This deep blue-green has an RGB value near 0, 125, 134 and an LRV around 15, so it absorbs substantial light and can look darker in shaded areas.

Pair it with a light, warm neutral such as cream, soft white, or pale beige for trim and siding. Natural materials, including cedar, brick, stone, and aged metal, can balance its saturated color without competing with it.

Practical exterior pairings:

• Trim: warm white or light cream
• Roof: charcoal, weathered gray, or dark brown
• Accents: natural wood, matte black, or aged brass
• Best placement: front door, shutters, porch ceiling, or dormer details

Test a sample on several sides of your home before painting. Check it in direct sun, shade, and evening light, since its low light-reflectance value can change its appearance throughout the day.

Mudroom

Use Sherwin-Williams Cote D’Azur on the walls to give your mudroom a rich blue-green backdrop. Its low light reflectance value, about 15, makes the color appear deep, so pair it with white or light-gray trim to keep the room balanced.

Choose durable finishes for areas that receive frequent contact. A washable satin finish works well on walls, while semi-gloss paint can protect doors, trim, and built-in storage.

• Cabinetry: warm white, soft gray, or natural wood
• Flooring: slate, medium-toned tile, or patterned porcelain
• Hardware: brushed nickel, black, or aged brass
• Accents: woven baskets and tan leather details

Test a sample beside your entry door and under both natural and artificial light. The color may look brighter in direct daylight and deeper in a windowless mudroom, so check it at different times before painting the entire space.

Patio

Use Sherwin-Williams Cote D’Azur on a patio accent wall, privacy screen, or outdoor fireplace surround to add a strong blue-green focal point. Its low light reflectance value, about 15, makes it look deep and saturated, so test a sample in both direct sun and shade before painting.

Pair the color with warm materials that soften its depth. Good choices include:

• Natural wood furniture
• Tan or cream cushions
• Terracotta planters
• Light stone or concrete
• Brushed brass or black metal

Choose an exterior-grade coating suited to your patio surface, and prepare the area carefully by cleaning, repairing, and priming as needed. Keep nearby walls and large furniture pieces lighter so the dark blue-green shade does not make a small patio feel crowded.

Kitchen

Use Sherwin-Williams Cote D’Azur on lower cabinets or a kitchen island to add rich blue-green color without covering every surface. Its low light-reflectance value can look deep in kitchens with limited daylight, so test a sample near windows and under your evening lights.

Pair the cabinets with warm white walls, light quartz, or pale wood to create contrast. Brushed brass and warm bronze hardware can soften the cool blue-green tones, while polished nickel gives the room a cleaner, cooler look.

Element	Suggested pairing
Walls	Warm white or soft cream
Countertops	White, ivory, or light gray
Hardware	Brass, bronze, or nickel
Flooring	Natural wood or light stone

Use a durable cabinet enamel in a satin or semi-gloss finish. Keep surrounding materials simple so the saturated color remains the main accent rather than competing with patterned tile or busy countertops.